What should be paid attention to when installing the solenoid valve?

1. When installing, pay attention that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in places where there is direct dripping or splashing of water. The solenoid valve should be installed vertically upward;

2. The solenoid valve should be guaranteed to work normally within the fluctuation range of 15%-10% of the rated voltage;
Buried rocker sprinkler SRPIR01

3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be energized several times to make it suitable for temperature before it can be officially put into use;

4. The pipeline should be thoroughly cleaned before the solenoid valve is installed. The incoming medium should be free of impurities. Install filter before the valve;

5. When the solenoid valve fails or is cleaned, in order to ensure the continuous operation of the system, a bypass device should be installed.